Fog Light Cover Ford Transit Custom – Autobeam

(248)

Bewertung schreiben

Mehr

€ 12.99

In den Warenkorb

Menge

Auf Lager

Beschreibung

Autoprint official high-quality Transparent Fog Light Covers for use with Ford Transit Custom. Choose from 10 custom-designed transparent colours.Perfect fit
Autoprint official high-quality Transparent Fog Light Covers for use with Ford Transit Custom. Choose from 10 custom-designed transparent colours.Perfect fit The Laser-cut acrylic design and official 3M Adhesive backing allow a quick and easy installation of the cover as it matches the exact measurements of the original fog light cut-out from the vehicle. FeaturesDesigned by AutoprintHigh-strength 3mm acrylic Perfect FitLaser-cut Made in the UKSpecificationMaterial: Transparent coloured 3mm acrylicFitment3M Adhesive backing | Ford Transit CustomInstallationPlease do not attempt to apply in cold conditions (less than 10°C) as this can affect the adhesive.Before applying, clean the surface area with an alcohol-based cleaner (tar & glue remover or similar) and allow to dry.Once the surface is clean and dry gently heat the sticky back tape and the surface it is to be applied to using a hair dryer or heat gun (take care using a heat gun if near painted surfaces). This will aid the adhesive process.Align the Fog Cover in the correct position and apply pressure for a minimum of 30 seconds.Do not pressure wash for at least 24 hours.What's in the box 1x Set of Fog light covers 1x Offical 3M adhesive pads

Autoprint official high-quality Transparent Fog Light Covers for use with Ford Transit Custom. Choose from 10 custom-designed transparent colours.

Perfect fit
The Laser-cut acrylic design and official 3M Adhesive backing allow a quick and easy installation of the cover as it matches the exact measurements of the original fog light cut-out from the vehicle.

Features

Designed by Autoprint
High-strength 3mm acrylic
Perfect Fit
Laser-cut
Made in the UK

Specification

Material: Transparent coloured 3mm acrylic

Fitment

3M Adhesive backing | Ford Transit Custom

Installation

Please do not attempt to apply in cold conditions (less than 10°C) as this can affect the adhesive.

Before applying, clean the surface area with an alcohol-based cleaner (tar & glue remover or similar) and allow to dry.

Once the surface is clean and dry gently heat the sticky back tape and the surface it is to be applied to using a hair dryer or heat gun (take care using a heat gun if near painted surfaces). This will aid the adhesive process.

Align the Fog Cover in the correct position and apply pressure for a minimum of 30 seconds.

Do not pressure wash for at least 24 hours.